Precision knife sharpening is a delicate operation; easy after practice, but to obtain first-class results with your Svord™ knife the following procedure should be observed.
Referring to the diagram, select the grade of 'Indian' or Arkansas' stone according to the degree of coarseness of the 'sawtooth' pattern desired. Take the knife in your usual working hand, lay it at an angle of 10-20 degrees to the stone, using the fingers on your free hand to apply mild pressure to the blade.
Draw the knife across the stone as if slicing from hte haft to the point. Turn the knife over and treat the other side in the same manner. Between 10 and 15 strokes to both sides of the blade should produce a very sharp durable edge, provided that the correct angle and even finger pressure on the blade is maintained throughout the operation. Test for sharpness by slicing a newspaper sheet - the cut should be easy and no catching or ripping should occur. Look at the edge of the blade under a bright light. Dull edges will be visible and shiny. If the tests fail - back to the stone!
Knife sharpening is an art, and it pays to practice on some cheap cutlery before carrying out work on your Svord™ knife.
Once you have mastered the method, you will find that your Svord™ knife will hold an amazing edge, and you will have an utterly dependable implement which will serve you faithfully for a lifetime.
In today's throwaway world of mass-produced short-life uniformity, I am proud to offer knives, 100% hand-crafted in the manner of the world's finest and most famous knives - the bowie, the Arkansas 'Toothpick' - and made from the finest steel with the best designed edge. I offer you Svord™ - the knives for your lifetime.